Removing And Installing Panels - Yamaha TRICKER XG250 Owner's Manual

Removing and installing
panels
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
2
1
1. Panel A
2. Panel B
3. Panel C
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU18771
2
3
1. Panel D
3
2. Panel E
3. Panel F
Panels A and D
To remove one of the panels
Remove the screw, and then pull the
panel off.
1
1. Screw
To install the panel
Place the panel in the original position,
and then install the screw.
EAU37812
Panels B and E
To remove one of the panels
Remove the bolt and washer, and then
remove the panel by sliding it forward
as shown.
6-5
2
1
3
4
5
6
7
8
9