Replacing The Fuse; Replacing The Headlight Bulb - Yamaha TRICKER XG250 Owner's Manual

Replacing the fuse

1
1. Fuse
2. Spare fuse
The fuse holder is located behind panel
F. (See page 6-5.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn off
all electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuse:
20.0 A
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23502
CAUTION:
Do not use a fuse of a higher amper-
2
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to "ON" and turn on
the electrical circuits to check if the
devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
ECA10640

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
1
1. Headlight rim
2. Screw
6-27
1. Remove the headlight rim by re-
moving the screws.
2. Remove the headlight unit by re-
moving the screws.
EAU37920
2
3
4
2
5
6
7
8
9