Yamaha TDM900 Owner's Manual page 57

2
1
1. Engine oil drain bolt B
2. Gasket
TIP
Skip steps 5–7 if the oil filter element is
not being replaced.
5. Remove the oil filter element cover
by removing the bolts.
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
1. Oil filter element cover
2. Bolt
6. Remove and replace the oil filter
element and O-rings.
6-11
1
2
1. Oil filter element
2. O-ring
7. Install the oil filter element cover by
installing the bolts, and then tight-
en the bolts to the specified torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
Make sure that the O-rings are properly
seated.
8. Install the engine oil drain bolts
and their new gasket, and then
tighten the bolts to the specified
torques.
1
2
3
4
5
6
7
8
9