Tenda 11N Wireless Broadband Router User Manual page 30

Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers.
You can enable it to calculate the traffic for you. Usually, disable it to improve the router's
data packet processing ability, and the default is disabled. When this function is enabled,
the webpage will refresh automatically every five minutes, meanwhile, each computer's
traffic value will refresh automatically.

IP address: the IP address of the computer whose traffic is being calculated.

Uplink rate: the data sending speed per second, the unit is KByte/s.

Downlink rate: the data receiving speed per second, the unit is KByte/s.
 Sent message: the number of the calculated computer's data packets that are
sent out through the router.
 Sent Bytes: the volume of the calculated computer's statistics that is sent out
through the router
 Received message: the number of the calculated computer's the data packets
that are received through the router.
 Received Bytes: the volume of the calculated computer's statistics that is
received through the router.
11N Wireless Broadband Router User Guide
25