Chapter 6 Dhcp Server; Dhcp Server; Dhcp Client List - Tenda 11N Wireless Broadband Router User Manual

6.1 DHCP Server

DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers
on the LAN/private network. When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP address pool to the requesting
computer in premise of activating "Obtain an IP Address Automatically". So specifying
the start and end address of the IP Address pool is needed.

DHCP server: Check the Enable box to enable DHCP server.

IP pool start/end address: Enter the range of IP addresses for DHCP server
distribution.

Lease time: It indicates the valid time of the dynamic IP address which is
distributed to the DHCP client's host computer by DHCP server. During this time,
the server will not distribute the IP address to any other host computer.

6.2 DHCP Client List

DHCP client list displays user computer' IP address, MAC address, host name and other
information which are assigned by the DHCP server. You can manually enter the IP and
MAC address and convert them to static assignment.
11N Wireless Broadband Router User Guide

Chapter 6 DHCP Server

34