Remote Web Management - Tenda 11N Wireless Broadband Router User Manual

8.4 Remote Web Management

This section instructs how to allow the network administrator to manage the Router
remotely. If you want to access the Router from outside of the local network, please click
the checkbox after "Enable".

Enable: Check to enable remote web management.

Port: The management port open to outside access. The default value is 80.

IP Address: Specify the range of the IP addresses of the computers on the
Internet for remote management.
NOTE:
1. If you want to log in the device's Web-based Utility via port 8080, you need to use the
format of WAN IP address: port (for example http：//220.135.211.56:8080) to implement
remote login.
2. If your WAN IP address starts and ends with 0.0.0.0, it means all hosts on the Internet
can implement remote Web management. If you change the Internet IP address as
218.88.93.33-218.88.93.35, then only the computers at the IP addresses of
218.88.93.33, 218.88.93.34 and 218.88.93.35 can access the Router to implement
remote web management.
For example:
If you want to configure the computer at the IP address of 218.88.93.33 to access the
router's web-based utility via port 8080, please set the parameters as above.
11N Wireless Broadband Router User Guide
45