Wan Settings - Tenda 11N Wireless Broadband Router User Manual

 System time：It displays the system's updated time

Connected client ：It displays the number of the connected computers(normally
it displays the number of clients whose IP addresses obtained via DHCP server)
 Software version：It displays the Router's software version；
 Hardware version：It displays the Router's hardware version.

4.2 WAN Settings

Virtual Dial-up (PPPoE)

Mode: Show your current connection mode.

Access Account: Enter the account provided by your ISP.

Access Password: Enter the password provided by your ISP.

MTU: Maximum Transmission Unit. It is the size of the largest data packet that can
be sent over the network. The default value is 1492. Do NOT modify it unless
necessary, but if a specific website or web application software cannot open or be
enabled, you can try to change the MTU value to 1450, 1400, etc.

Service Name: The connection name for current PPPOE, enter it if necessary，
otherwise, leave it blank.

AC Name: The service name, enter it if necessary，otherwise, leave it blank.
11N Wireless Broadband Router User Guide
15