Mounting - Honeywell Dolphin 7600 User Manual

Mounting

If you want to mount to a vertical surface, be sure to provide enough workspace with good lighting for the
user to view and operate the Dolphin terminal while it is seated in the base.
Back Panel Dimensions
.32 in.
8.06mm Diameter,
2 places
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #4–diameter measurement of 0.112
in. (2.845 mm).
2. Drill two holes into the wall. The holes should be located approximately 1.44 in. (36.7 mm) apart.
3. Insert a screw into each hole, leaving 0.2 in. (5 mm) of its head exposed.
11 - 6
.15 in.
(3.85 mm.)
4.35 in.
(110.47 mm.)
1.44 in.
(36.7 mm.)
.53 in.
13.65mm,
2 places
1.85 in.
(46.87 mm.)
3.99 in.
(101.42 mm.)