Honeywell Dolphin 7600 User Manual page 129

Bottom Panel Mounting Dimensions
4.78 in.
(121.4
mm.)
1.42 in.
1.17 in.
(36 mm.)
(29.7 mm.)
DIN Rail Dimensions
.98 in. (25 mm.)
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #5–diameter measurement of 0.125
in. (3.18 mm).
2. Drill two holes into the wall, using the slots of the DIN Rail to locate. To ensure stability, holes should
be located at least 4 inches (101.6mm) apart.
3. Insert a screw into each hole. The screw heads should be flush with the surface of the DIN rail,
.99 in.
.13 in. (3.4 mm.)
(25.2 mm.)
.7 in. (17.8 mm.)
.25 in.
1.38 in.
(6.3
(35 mm.)
mm.)
11 in. (278.93 mm.)
6.17 in. (156.8 mm.)
.99 in. (25.2 mm.)
.14 in.
(3.6 mm.)
1 in.
(27mm.)
.04 in. (1 mm.)
12 - 5