Network Cards - Honeywell Dolphin 7600 User Manual
Mobile computer with windows mobile 6
Hide thumbs
Also See for Dolphin 7600:
- User manual (142 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
Network Cards
The Network Cards setting displays the network cards installed in the terminal.
1. Tap Start > Settings > Connections > Network Cards.
2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK to confirm the changes.
4. You must perform a soft reset to update the registry entries; see
25.
During the soft reset, the new registry entries are created and can be read by the applications
that need them.
Do NOT perform a
the terminal to factory defaults, which erases network adapter modifications made here.
Hard Reset (Cold Boot)
(see page 3-25) after modifying an adapter here. Hard resets return
Soft Reset (Warm Boot)
on page
3-
7 - 9
Advertisement
Table of Contents
