Switching The Appliance On And Off - AEG FM4300G-AN User Information

Switching the appliance on and off

1. Turn the ring switch to the left to
maximum power
2. Press the ring switch in firmly, until
the gas has ignited. After a success-
ful ignition hold the ring switch de-
pressed for about 5 seconds. If the
flame should go out, repeat the ig-
nition process.
3. Set the desired power. The power
can be set progressively from maxi-
mum power
.
4. To end the cooking process, turn
back to the Off position.
3
In the event of a power cut or also when the spark plug is wet (because
of food boiling over or cleaning) the rings can also be ignited using a
gas lighter or a match.
1
Warning!
Only take cookware from the ring when at minimum power or in the
Off Position •.
10
.
to minimum power