Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FM 4360G-an
Summary of Contents for AEG FM 4360G-an
- Page 1 INSTRUCTION BOOK FM 4360G-an 325 88-8612 rev. 2-347 949 601 756...
-
Page 2: Your New Appliance
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. -
Page 3: Table Of Contents
Contents Page no. For the User Your New Appliance ..................Safety Information ..................Product Description ..................Ceramic Hob ..................The burner ....................Before use ......................Protect the ceramic Hob................Clean the burner ..................How to Use the Hob ..................Ceramic Hob ..................Burner...................... -
Page 4: For The Installer
Indhold Side nr. For the Installer Unpacking ......................Technical Data....................Important safety requirements ..............Installation......................Mounting ......................How to read the operating instructions 1... 2...Step by step Hints and tips Safety information Environmental information The products are continuously being developed and it may occur that some product specifications are changed after this instruction book was printed. -
Page 5: Safety Information
Safety Information Cleaning and Maintenance The hob is intended for domestic use Remember that the hob top, the pan only. If it is used in any other way supports and the burners will stay there is a risk of accidents. hot for a long time after you have turned off the heat. - Page 6 Installation Installation of the cooker hob may only be carried out by Corgi regis- tered installer. Work carried out by unqualified persons could lead to personal injury or damage to proper- ty, and spoil the hob itself. During installation make sure the electricity cable is not pinched.
-
Page 7: Product Description
Product Description 1. Burner 2. Control panel Control Panel Control knob for burner... -
Page 8: Ceramic Hob
Ceramic hob Ceramic glass is insensitive to tem- perature shock and very robust: however it is not unbreakable. Especially sharp and hard objects that fall on the cooking sur- face can damage it. The burner The burner consists of a burner Burner ring Burner cap body, a burner ring and an inner and... -
Page 9: Before Use
Before Use Protect the ceramic hob Before using the product for the first time, clean off any factory residues such as dust or dirt. Give the ceram- ic hob a protective coating before using it. This will make it easier to clean the hob and will prevent spills etc. -
Page 10: How To Use The Hob
How to use Ceramic hob Never use a cracked ceramic hob. Water could boil over and/or cleaning agents pene- trate into the live electrical parts. Switch off the power to the appliance and contact Service. Never leave the hob unat- tended when deep frying or melting fat, paraffin wax or other easily ignited sub-... -
Page 11: Burner
The burner Burner ring Burner cap Make quite sure the burner Right ring and burner cap are posi- tioned correctly over the burner top. Burner body Safety device For correct combustion the burner rings and burner covers must be positioned correctly over the burner Wrong top. -
Page 12: Choice Of Pans
While the control knob is being held down, sparks will be formed. This is done by the electrical ignition which lights the gas without your having to use matches. If no electrical connec- tion is possible, you can light the gas with matches. -
Page 13: Cleaning And Maintenance
Cleaning and Maintenance For hygienic and safety rea- 2. Make sure the hob has cooled sons the gas burners must be down. kept clean. Grease splashes Use a cleaning agent designed and spilt food will give off for ceramic hobs. fumes when heated and in Follow the instructions on the the worst case can lead to a... -
Page 14: The Burner
The burner Clean the burner covers and ring in hot water and washing-up liquid. Never use metal cleaning pads, metal wool or other abrasive clean- ers. Pan supports Clean pan supports in hot water and washing-up liquid Never use metal cleaning pads, metal wool or other abrasive clean- ers. -
Page 15: Unpacking
Unpacking Check that the appliance has no faults and is undamaged on delivery. Transport Damages Any damages resulting from a trans- port which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the prod-... -
Page 16: Technical Data
66 mm Category and pressure: GB: II2H3+ -20-28/37 mbar Installation dimensions: Width: 340 mm FM 4360G-an has been adjusted for Depth: 490 mm use with natural gas G20 - 20 mbar Height: 55 mm An LPG conversion kit G30 - 28/37... -
Page 17: Important Safety Requirements
Important safety requirements This hob must be installed in accor- This hob must be installed by qualified personnel to the dance with the Gas Safety relevant British Standards. (Installation and Use) Regulations (Current Edition) and the IEE Any gas installation must be Wiring Regulations (Current carried out by a CORGI Edition). -
Page 18: Installation
Installation Gas installation Installation may only be car- ried out by a Corgi registered installer. Work carried out by unqualified persons may lead to personal injury and/or damage to property, and may damage the product. This gas appliance is CE-approved and CE-marked in accordance with the Gas Appliance Directive (90/396/EEC, Low Voltage Directive... -
Page 19: Electronic Control
Electronic Control Cable type 0.75 mm2 HO5 VV-F Installation must comply with any special requirements laid down by the local electricity provider. The plug, in which the product must be connected, must be accessible for eventual disconnection. -
Page 20: Mounting
Mounting The hob can be installed in any type of kitchen worktop with a thickness of 28-40 mm. However, if an oven is to be installed beneath it, the work- top must be at least 40 mm thick. Cutting Out When mounting this hob: Read the instructions on this and the follow- ing page. - Page 21 However, to ensure accessi- bility to the gas connection there should generally be at least 50 mm between the rear of the hole for the gas hob and the wall behind it. 1. Cut a hole in the worktop of the given dimensions, see “Technical data”, “installation dimensions”.
- Page 22 Mounting more than one hob Distance to wall: Min. 150 mm (flammable material) Distance to wall: Min. 50 mm ( non-flammable material ) Reinforcement beam Cutting out The measurement of the selected combination is calculated in the following way: Depth: 490 mm Width: 1.
- Page 23 Mounting: When mounting several hobs together you must use a reinforcement beam between each hob as well as the silicone supplied with the hobs (see fig.) 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat. Take care that the top side is not scratched.
- Page 24 To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone: 1. Remove the aluminium panels from the hobs. 2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only the silicone supplied, as it is designed to tolerate the appliance’s high temper- ature.
- Page 25 Overview of the outside width of the units 180 mm Downdraft 360 mm Glass ceramic hob with 2 cooking zones Gas hob with 2 burners Induction hob with 2 cooking zones Grill Grill / Fryer 580 mm Glass ceramic hob with 4 cooking zones Gas hob with 4 burners 720 mm...
-
Page 26: What To Do If
What to do if... If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. -
Page 27: Service And Spare Parts
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. -
Page 28: Guarantee Conditions
GUARANTEE CONDITIONS Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ·... - Page 29 · Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. · Products of AEG manufacture which are not marketed by AEG. European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: ·...