Operating The Appliance; Switching The Appliance On And Off; Setting The Heat Setting; Locking/Unlocking The Control Panel - AEG 88131 K-MN User Manual

Operating the appliance

3
Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

Switch on
Switch off
3
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.

Setting the heat setting

To set the heat set-
ting
To switch off

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off" sensor field, can be locked at any
time in order to prevent the settings being changed e.g. by wiping over the panel with a
cloth.
Switch on
Switch off
3
When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm
mode then back to the heat setting they were at before.
To switch on
To switch off
3
STOP+GO does not stop timer functions.
3
STOP+GO controls the entire control panel apart from the sensor field
Control panel
Touch for 2 seconds
Touch for 1 second
Control bar
Touch the desired heat setting, if neces-
sary, correct to the left or the right
Touch 0
Control panel
Touch
Touch
Control panel
Touch
Touch
Operating the appliance
Display Pilot light
/ lights up
/ none goes out
Display
to
Display
(for 4 seconds)
previously set heat setting
Display
Previous heat setting (not automatic
warm-up or power function)
29
/
.