Operation Of The Cooking Surface; Touch Control Sensor Buttons; Switching On The Appliance; Switching Off The Appliance - AEG 65300KF-an Operating Instructions & Installation Instructions

Glass ceramic cooking surface

Hide thumbs Also See for 65300KF-an:

Table of Contents

Operating Instructions

Operation of the cooking surface

To operate the TOUCH CONTROL sensor buttons, place your finger flat, from

above, on the desired button until the corresponding indicator illuminates,

or extinguishes, or the desired function is performed.

For quicker adjustment leave your finger on the button until the desired

value is reached.

All entries are acknowledged by an acoustic signal.

Switch on the appliance using the main "On/Off" button.

The "Heat Setting/Residual Heat" display fields show

After the main "On/Off" button has been operated to switch on your ap

pliance, one of the cooking zones must be selected using the cooking zone

selection buttons within approx. 10 seconds. Otherwise the appliance swit

ches off again for safety reasons.

Operate the main "On/Off" button to completely switch off the appliance.

After the individual cooking zones or the entire cooking surface have been

switched off, the presence of residual heat is indicated by

in the "Heat Setting/Residual Heat" display fields of the respective cooking

zones.

If all cooking zones are switched off, the appliance switches off automati

cally after a period of time.

All manuals and user guides at all-guides.com

(as in "Hot")

Table of Contents