Electrolux EOB64140 User Manual page 20

20 electrolux
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! The rounded ends of the
shelf support rails must point to the front!
Oven lamp
Warning! There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
4. Install the glass cover.
Replacing the oven lamp (left side of the
appliance) Cleaning the glass cover
1. Remove the left shelf support rail.
2. Use a cross-tip screwdriver to remove
the glass cover.
3. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
4. If necessary: Replace the oven lamp.
Technical data: 300°C, heat resistant.
5. Install the glass cover.
6. Install the left shelf support rail.
Oven door and glass panels
To clean the oven door remove it.
Caution! Be careful when you remove
the door from the appliance. The door is
heavy!
Removing the oven door
1. Open the oven door as far as it goes.
2. Lift up clamping levers (A) on the two door
hinges fully.
A
3. Close the oven door until the first position
(angle approx. 45°).
A