Electrolux ESI 662 User Instructions
Electrolux ESI 662 User Instructions

Electrolux ESI 662 User Instructions

Amc dishwasher

Advertisement

D
i
s
h
w
a
s
h
e
r
U s e r I n s t r u c t i o n s
ESI 662
EN
ANC 822 945 811 - 00 - 1101

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux ESI 662

  • Page 1 U s e r I n s t r u c t i o n s ESI 662 ANC 822 945 811 - 00 - 1101...
  • Page 2 Dear customer, Please read these user instructions carefully. Your dishwasher is fitted with the new Above all please observe the safety instructions on "PULSE WASH" wash system the first few pages ofthese user instructions! Please With this wash system, the motor speed keep these user instructions for later reference.
  • Page 3: Table Of Contents

    Contents Safety Instructions ..............4 Securing the door of the dishwasher .
  • Page 4: Safety Instructions

    Safety Instructions The safety aspects of ELECTROLUX electrical appli- • Never place the dishwasher in operation if the ances comply with accepted technical standards and mains cable, water inlet or drain hose is damaged; the German Appliance Safety Law. Nevertheless, as...
  • Page 5: Securing The Door Of The Dishwasher

    Securing the door of the dishwasher This way you can ensure that children cannot open the door of the dishwasher: 1. There is a lever (1) on the left side of the door han- dle. You can secure the door against being opened unintentionally by pressing this lever to the back using a small screwdriver or the handle of a spoon.
  • Page 6: Economical And Ecological Dishwashing

    Economical and Ecological Dishwash- • Only connect the dishwasher to the hot water sup- ply if your hot water is not electrically heated. • Ensure that the water softener is correctly adjusted. • Do not pre-rinse dishes under running water. •...
  • Page 7: Appliance Features And Control Panel

    Appliance Features and Control Panel Top Spray Nozzle Rubber Seal for Con- necting Water Feed to the Upper Spray Arm Spray Arms Container for Special Salt Container for Rinse Aid Container for Detergent Rating Plate Filters...
  • Page 8: Control Panel

    Control panel Function Button Softener Button Door Handle Indicators Start Delay Control Field Multi-Display The Control Field comprises the ON/OFF switch Softener and Function Button: In addition to the and the programme buttons with LED indicators. wash program marked, it is also possible to adjust the dishwasher's water softener using the combination of The Multi-Display can display, these buttons.
  • Page 9: Prior To Using For The First Time

    Prior to using for the first time Prior to using for the first time, remove all the clips with which the dish racks are secured for transport. Then perform the following steps: 1. Adjust the water softener 2. Filling with Special Salt for the Water Softener 3.
  • Page 10: Filling With Special Salt For The Water Softener

    Filling with Special Salt for the Water Softener Use only special salt for dishwashers. Never fill the salt container with any another type of salt (e.g. culinary salt) or dishwasher deter- gent. This would irreparably damage the water softener. Prior to filling with salt, please check each time that you really do have a packet of spe- cial salt in your hand.
  • Page 11: Filling With Rinse Aid

    Filling with Rinse Aid Rinse aid ensures that your dishes gleam and are free from spots, and that you glasses are clear. Use only branded rinse aid for dishwashers. Never fill the rinse aid container with any another substance (e.g. concentrated vine- gar).
  • Page 12: In Daily Use

    In Daily Use • Is it necessary to refill with special salt or rinse aid? • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a wash programme suitable for the cutlery and dishes • Start the wash programme Loading cutlery and dishes Sponges, household cloths and any object...
  • Page 13: Loading Cutlery

    Loading Cutlery If they are placed in the cutlery basket, long, pointed items of cutlery are a hazard, par- ticularly to children (see Safety Instructions). They must therefore be laid horizontally in the upper basket. To ensure that all cutlery is efficiently washed and reached by the water you should: 1.
  • Page 14: Loading Cups, Glasses And Coffee Services

    Loading Cups, Glasses and Coffee Services Arrange smaller, sensitive items in the lower rack and place long, pointed items of cutlery in the knife drawer. • Arrange plates and dishes offset on and under the folding cup racks so that washing water can reach all items.
  • Page 15: Adjusting The Height Of The Upper Basket

    Adjusting the Height of the Upper Basket Maximum Height of the Dishes in the Upper Rack Lower Rack With upper basket raised 22 cm 31 cm With upper basket lowered 24 cm 29 cm Type 1 The height of the basket can also be adjusted when it is loaded.
  • Page 16: Filling With Detergent

    Filling with Detergent Only use dishwasher detergent. Fill with detergent: Prior to the start of a wash programme (not for the pre wash programme). The detergent is released into the wash water during the programme. Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging.
  • Page 17: Selecting The Wash Programme (Programme Table)

    Selecting the Wash Programme (Programme Table) Choose the most suitable wash programme with the aid of this table: Type of Coffee Service and Dessert Dinner Service and Cooking Utensils Dishes: Dishes Dish Types In Addition: with non-temperature resistant with delicate dishes glasses Type of...
  • Page 18: Start The Wash Programme

    Start the wash programme 1. Check that the dishes and cutlery are loaded into Interrupting the wash programme by the dishwasher in such a manner that the spray opening the door of the dishwasher arms are free to rotate. Hot steam may escape from the appliance 2.
  • Page 19: Setting Or Changing The Start Delay Timer

    Setting or Changing the Start Delay Timer Using the start delay timer you can adjust when the wash programme is to begin within the next 19 hours. Setting the start delay timer: 1. Press the ON/OFF button Å 2. Keep pressing the DELAY TIMER button until the number of hours of delay until the wash pro- gramme is to start are flashing on the multi-dis-...
  • Page 20: Switching Off The Dishwasher

    Switching Off the Dishwasher Only switch the dishwasher off when the multi-display indicates "0" remaining programme time. 1. Press the ON/OFF button . The ON/OFF but- indicator extinguishes. Hot steam may escape from the appliance when opening the door immediately after the end of the programme.
  • Page 21: Care And Cleaning

    Care and Cleaning Do not under any circumstances use furni- ture care products or aggressive cleaners. • If necessary, clean the controls only with a soft cloth and pure warm water. • The spray arms do not need cleaning. • Occasionally check the internal containers, door seal, and water inlet for soiling, clean if necessary.
  • Page 22: What To Do, When

    What to do, when ... Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in cus- tomer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guar- antee.
  • Page 23: There Are Problems When Operating The Dishwasher

    ... there are problems when operating the dishwasher. Fault Possible cause Remedy The dishwasher door has not been closed Close the door. properly. The mains plug is not plugged in. Insert the mains plug. The fuse has blown in the household fuse Replace the fuse.
  • Page 24: Technical Data

    Technical Data Capacity: 12 place settings including serving dishes Permitted Water 1-10 bar (=10-100 N/cm = 0.1-1.0 MPa) Pressure: Electrical Connection: Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door on the right. Dishwasher: Free-Standing Appliances Dimensions: 850 x 600 x 600 (H x B x D in mm)
  • Page 25: Notes For Test Institutes

    Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test pro- gramme (see Programme Table). Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme Normal 50 °C.
  • Page 26 Sample loading arrangement: Cutlery basket Some dishwasher models have cutlery baskets with- out a grid insert.
  • Page 27: Installation And Connection Instructions

    INSTALLATION AND CONNECTION INSTRUCTIONS Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level. • To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units extend the threaded feet by unscrewing : –...
  • Page 28: Built-In Dishwasher

    Built-In Dishwasher (see enclosed installation instructions) Free-Standing Appliances can be set up as stand-alone without addi- tional installation. If the dishwasher is set up next to a cooker, a heat-insulating, non-flammable plate must be mounted between the dishwasher and the cooker, flush to the top edge of the work sur- face (depth 57.5 cm).
  • Page 29: Connecting The Dishwasher

    Connecting the Dishwasher Water Connection The dishwasher is fitted with safety devices that pre- vent the wash water returning into the drinking water system and comply with the applicable plumbing reg- ulations. • The dishwasher can be connected to cold and hot water supplies up to max.
  • Page 30: Water Drain

    Water drain Drain hose The drain hose must not be kinked, crushed or entangled. • Connecting the drain hose: – Maximum permitted height: 1 metre. – Minimum required height 30 cm above the lower edge of the machine. Extension hoses •...
  • Page 31: Leak Prevention System

    Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention sys- tem. In the event of a fault, the drain pump switches on. By this means water can neither escape nor overflow. The remaining water in the appliance is automatically pumped out.
  • Page 32: Connections

    Connections The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher because there is no space for them behind the appli- ance. The example plumbing and electrical installation given below can only be regarded as a recommenda- tion;...
  • Page 35: Service

    SERVICE In the section "What to do, if..." the most important sources of faults that you can rectify yourself are summarised. If, nevertheless, you call in customer service to resolve a problem listed in these instruction, or because of an error made in operating the appliance, the customer service engineer’s visit is not free of charge, even during the warranty period.

Table of Contents