Filling With Rinse Aid; Adjusting Rinse Aid Dosing - Electrolux ESI 662 User Instructions

Filling with Rinse Aid

Rinse aid ensures that your dishes gleam and are
free from spots, and that you glasses are clear.
Use only branded rinse aid for dishwashers.
1
Never fill the rinse aid container with any
another substance (e.g. concentrated vine-
gar). This would damage the appliance.
Fill with rinse aid:
• Prior to using the dishwasher for the first time
When the RINSE AID indicator
•
panel is illuminated.
The rinse aid compartment is on the inside of the
dishwasher door.
1. Open the door.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Fill with rinse aid exactly up to the level marked
"max"; this corresponds to a quantity of approx.
140 ml.
5. Close the lid and press until it locks into place.
6. Wipe up any spilt rinse aid with a cloth. Otherwise
too much foam will be formed during the wash.

Adjusting Rinse Aid Dosing

As the dishes are washed rinse aid is
3
released from the dispenser into the wash
water. The dose is factory set at 4, and can
be adjusted from 1 to 6. Only change the set-
ting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.
1. Open the door of the dishwasher.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Set the dose level.
5. Close the lid and press until it locks into place.
6. If rinse aid has run out, wipe up with a cloth.
H
on the control
11