Honda 08E51-S84-100 Installation Instructions Manual page 7

23. Unplug the 16-pin (gray) connector from the inside of
the switch case, and plug the 16-pin (gray)
connectors of the security system wire harness in
between.
16-PIN
CONNECTORS
SECURITY SYSTEM
WIRE HARNESS
24. Secure the 16-pin connector of the vehicle harness
to the security system wire harness with one wire
tie.
25. Locate the 4-pin, 5-pin, and 6-pin connectors above
the fuse box, and unplug the three connectors. Plug
the 4-pin, 5-pin, and 6-pin connectors of the security
system harness in between.
4-PIN
CONNECTORS
6-PIN
CONNECTORS
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
16-PIN
CONNECTORS
OF SECURITY
SYSTEM WIRE
HARNESS
VEHICLE
WIRE TIE
WIRE HARNESS
5-PIN
CONNECTORS
5-PIN
SECURITY SYSTEM
WIRE HARNESS
26. Plug the 22-pin connector of the security system
wire harness into the control unit, then secure the
harness to the vehicle harness with one wire tie in
the area shown.
VEHICLE WIRE
HARNESS
4-PIN
6-PIN
AII 21018 (9909)
SECURITY SYSTEM
WIRE TIE
WIRE HARNESS
22-PIN
CONNECTOR
CONTROL UNIT
7 of 9