Honda CBR250R/RA Owner's Manual page 73

Combined ABS
CBR250RA
This motorcycle is equipped with a Combi
Brake. Operating the front brake lever
applies the front brake. Operating the rear
brake pedal applies the rear brake and a
portion of the front brake. For full braking
effectiveness, use both the lever and pedal
simultaneously, as you would with a
conventional motorcycle braking system.
As with a conventional motorcycle braking
system, excessively hard application of the
brake controls may cause wheel lock,
reducing control of the motorcycle.
This model is also equipped with an Anti-
lock Brake System (ABS) designed to help
prevent wheel lock up during hard braking
on uneven or other poor surfaces while
running straight. Although the wheel may
not lock up if you are braking too hard in a
turn the motorcycle can still lose traction,
causing a loss of control.
In some situations, a motorcycle with ABS
may require a longer stopping distance to
stop on loose or uneven surfaces than an
equivalent motorcycle without ABS.
ABS cannot make up for road conditions,
bad judgment, or improper operation of the
brakes. It is still your responsibility to ride
at reasonable speeds for weather, road
surface, and traffic conditions, and to leave
a margin of safety.
ABS is self-checking and always on.
ABS may be activated by riding over a
sharp drop or rise in the road level.
It is important to follow the tyre
recommendations (page
computer works by comparing wheel
speed. Non-recommended tyres can
affect wheel speed and may confuse the
ABS computer.
ABS does not function at low speeds
(approximately 10 km/h (6 mph) or
below).
ABS does not function if the battery is
discharged.
http://mototh.com
37 ). The ABS
63