Helmet Holder - Honda CBR250R/RA Owner's Manual

HELMET HOLDER

The helmet holder is located below the rear
seat.
Remove the rear seat (page
helmet wire ( ) through the helmet D-ring 1
( ) and hook the loops of the helmet wire 2
onto the helmet holder ( ).
Install the rear seat and lock it securely.
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a
crash in which you can be seriously
hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
47 ). Route the
3
http://mototh.com
(1)
(1) Helmet wire
(2) Helmet D-ring
(3)
(2)
(3) Helmet holder
49