Installation Settings - AT&T Call Display 435 User Manual

Installation Settings

Language Selection
You can select English, Spanish or French as the language in which your
Caller ID information is displayed. When you first plug in the power cord,
the screen displays the language selection screen.
To select a language, press + until the desired language appears on the
screen, then press N.
Set Home Area Code
After you select a language for the display, you'll need to program your area
code into the unit, so it can properly recognize and dial calls. If you dial
seven digits for phone numbers within your area code, be sure to enter
your Home Area Code.
NOTE: If you dial 10 digits for calls within your own Home Area Code
(and possibly for calls to other area codes that are not long distance),
then 1) enter 000 for your Home Area Code, and 2) enter your area
code (and other area codes used for local calls) as Local Area Codes
(see "Programming Local Area Codes").
— OR —
If you dial 11 digits for all calls, whether or not they are in your area
code, and whether or not they are long distance, enter 000 for your
Home Area Code, and enter no Local Area Codes.
1 Press + until the screen displays the first digit of your area code, then
press D.
2
Press + until the screen displays the second digit of your area code,
then press D.
3
Press + until the screen displays the third digit of your area code,
then press D.
4 Press N.
5