Telephone settings
Answering system settings
-OR-
Press the MENU softkey on the telephone base in idle
1.
mode to enter the main menu.
DIR,
2.
Press
Answering sys, then press the SELECT softkey.
3.
Press
DIR,
Mailbox 1 or Mailbox 2, then press the SELECT softkey.
4.
Press
DIR,
Answer ON/OFF, then press the SELECT softkey.
5.
Press
DIR,
or Off, then press the SET softkey to confirm. You hear
a confirmation tone.
NOTES:
•
If there is no remaining recording time, the answering system announces, "Memory is
full" and it turns off.
•
If the total recording time is less than three minutes, the answering system announces,
"Less than three minutes to record," and your handset and telephone base display
Ans sys low.
•
If the answering system is off, you may press
/ON/OFF LINE 2 on the telephone base to turn on the corresponding answering
system during an incoming call. The corresponding answering system answers the call
immediately .
CID, /DELETE or /REC to scroll to
CID, /DELETE or /REC to choose
CID, /DELETE or /REC to highlight
CID, /DELETE or /REC to choose On
/ON/OFF LINE 1 or
60
ANSWERING SYS
Mailbox 1
Mailbox 2
SELECT
MAILBOX 1
Delete al l old
Record memo
Answer ON/OFF
SELECT
ANSWER ON/OFF
On
Off
SET