Table of Contents
Advertisement
CUSTOMER RESPONSIBILITIES
•
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners
Check for worn or damaged parts
Check tire inflation
Cleaning
Lubricate
CHECK FOR LOOSE FASTENERS
•
Before each use make a thorough visual check of
the spreader for any bolts and nuts which may have
loosened. Retighten any loose bolts and nuts.
CHECK FOR WORN OF DAMAGED PARTS
•
Check for worn or damaged parts before each use.
Repair or replace parts if necessary.
CHECK TIRE INFLATION
•
Check if tires are adequately inflated before each
use. Do not inflate beyond maximum recommended
pressure.
CAUTION: DO NOT inflate tires beyond
the maximum recommended pressure
printed on side of tire.
CLEANING
•
Rinse inside of hopper and exterior of spreader and
dry off before storing.
MAINTENANCE/STORAGE
X
X
X
X
X
X
X
X
12
Service Dates
LUBRICATE (See figure 18.)
•
Lightly apply automotive grease as needed to the
sprocket and gear.
•
Oil the nylon bushings on the vertical sprocket shaft
and on the axle at least once a year, or more often as
needed.
•
Oil right hand (idler) wheel bearing at least once a
year or more often as needed.
OIL
FIGURE 18
STORAGE
•
Rinse inside of hopper and exterior of spreader and
dry off before storing.
•
Store in a clean, dry area.
OIL
GREASE
Advertisement
Table of Contents
