Connecting Your Adt Mobile Emergency Response System - ADT IGB-02 User Manual

Connecting Your ADT Mobile Emergency Response System

Step 1 Select a Location
Place the Mobile Device cradle charger near the center of your home or in your

bedroom.
Place it near an electrical outlet.

Step 2 Connect the Cradle Charger (refer to Figure 3)
Plug the power cord into the slot on the back of the Cradle Charger, making sure

that the narrow side is on the bottom.
Plug the other end of the power cord into an electrical outlet that is not

controlled by a light switch.
The green LED light on the plug of the power cord should illuminate.

6 ADT Health Customer Support 800.568.1216
®