Minolta EP1030 User Manual page 37

3 While the Toner is being
replenished, the LEDs at the
bottom of the Display Panel will
light up one at a time in the
clockwise direction.
4 Press the Clear/Stop Key to
stop the Toner Replenishing
mode.
NOTE

Copying cannot be performed while the Toner is being replenished. If
copying must be performed, stop the Toner Replenishing mode with
the Clear/Stop Key and then start copying.

The copier cannot enter the Toner Replenisher mode under the
following conditions: the starter is being refilled, and the indicators
show that an error or paper misfeeds has occurred.
Rev. 1.x/22.05.02 29
4.1 Toner Replenisher
EP1030/EP1030F