Table of Contents
Advertisement
3.6
Hints for Advanced Copying
By using the Multi Bypass function, two-sided and composite (overlay)
copies can be made. The procedures are shown below.
Two-Sided Copying
1
In order to copy the contents of
two originals onto the front and
back of a single sheet of copy
paper, position the first original
and second original as shown in
the illustration. It is important
that they are positioned in the
same direction.
2
When the copy of the first
original has been fed onto the
Copy Tray, turn it over without
changing the position of its
leading edge and insert it into
the Multi Bypass port.
NOTE
Only plain paper can be used for making two-sided and composite
copies. (No transparencies can be used.)
If the paper is curled, remove the curl before inserting the paper into
the copier.
Composite Copying
Rev. 1.x/22.05.02
3.6 Hints for Advanced Copying
st
1
Original
25
nd
2
Original
EP1030/EP1030F
Hide quick links:
Advertisement
Table of Contents
