LevelOne WBR-6600 User Manual page 84

MPoA Connection
 Description: Your description of this connection.
 VPI and VCI: Enter the VPI and VCI information provided by your ISP.
 Encap. method: Select the encapsulation format, the default is LLC. Select the one
provided by your ISP.
 Encap. mode: Choose whether you want the device to function as bridge mode or
routing mode.
 NAT: The NAT (Network Address Translation) feature allows multiple users to access
the Internet through a single IP account, sharing the single IP address. If users on your
LAN have public IP addresses and can access the Internet directly, the NAT function
can be disabled.
 IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
 Netmask: The default is 255.255.255.0. User can change it to other such as
255.255.255.128. Type the subnet mask assigned to you by your ISP (if given)
 Gateway: Enter the IP address of the default gateway.
 Obtain DNS Automatically: Select this check box to use DNS.
 Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS
servers are passed to the DHCP clients along with the IP address and the subnet
mask.
84