Table of Contents
Advertisement
3. In the WBR-6600‟s WPS configuration page
a. Enable the WPS Service
b. Change Role to Registrar
c. Enter in the PIN Code on your wireless client
d. Click the Start button.
4. The router will now be waiting for other WPS devices to connect, as indicated by the
blinking WPS light.
In the future, you can set the router to search for WPS devices by pushing the
WBR-6600‟s WPS button on the back of the unit for 1 second and then release.
Note: The router will only wait 2 minutes for a client to connect. If you
take longer than 2 minutes to set up the client, then you will need to
re-initiate WPS on the WBR-6600.
5. Now click the PIN Code Method button on the wireless client‟s utility.
6. The wireless client should now have implemented the security settings on the
WBR-6600 and successfully achieved a connection.
71
Advertisement
Table of Contents
