Table of Contents
Advertisement
Set up WBR-6600 as WPS Registrar
Using the Registrar mode, it means that the WBR-6600 will be allocating the wireless
security parameters such as encryption method and passphrase.
There are two methods of connecting the WBR-6600 router to wireless devices using
WPS. They are the Push Button Method and the PIN Code Method.
Push Button Method is to either press the physical WPS buttons on the WPS
devices, or click the Push Button Configuration (PBC) button in the software
utility.
PIN Code Method to use the software utility to authenticate using a PIN code.
When using WPS as a registrar for the first time, please set up your wireless security
settings first. See page 57.
Push Button Method
1. First make sure wireless security settings are set up.
2. Ensure WPS is enabled on the Wireless settings page.
68
Advertisement
Table of Contents
