Appendix A | Installation Checklist
Before leaving the premises, complete the following Installation Checklist.
Redcare Secure unit securely mounted in host alarm system.
Redcare Secure unit powered up.
Tamper connection wired if required.
Configuration and learn link headers removed.
Wireless signal strength is acceptable.
Redcare Secure unit communicating with Redcare ESP over Wireless interface.
Redcare Secure unit communicating with the Redcare ESP over Wireline path.
Alarm panel connected to Redcare Secure unit via dial-capture or pin interface as
required.
Alarms sent and received at ARC over all available interfaces.
No Bad Panel Feed alarm events outstanding.
Installation, Maintenance and Operation Manual V24a (June 2012)
Page 30 of 40
British Telecommunications plc 2012