Table of Contents
Advertisement
Owner's Guide
LCD DISPLAY
STATUS ICONS
PROGRAM ICONS
STATUS CHECK MODE
This feature is used to check the status of the alarm system or the remote starter.
1. To check the status press and release Button #4 on the remote transmitter.
2. The remote will display the icons of the active features on the LCD screen.
Note: In status check mode the LCD will stay on for five seconds then shut off.
STATUS ICONS
These icons are located at the top of the LCD screen as scene above. These icons are used to display
the current operating status of the system. Some icons will always be visible and will only be displayed
when one of the systems features are in use. The following is a list and description of the status icons
and when they will be present on the LCD screen
ANTENNA ICON
This icon will be visible on the LCD whenever the remote is within transmitting range of
the vehicle. The icon will disappear when the remote leaves that transmitting range.
TELEPHONE ICON
When the vehicle starts in Timer Mode, this icon will appear in conjunction with the
usual icons that indicate that the vehicle is running by the remote starter.
Note: When the vehicle starts in timer mode no sound should come from the
remote and the back light should not turn on.
KEY ICON
This icon will begin to flash when the remote starter button is first pressed. After the
vehicle has started this icon will stay on solid. The wheels on the car will begin to
rotate.
SIREN ICON
This icon indicates that the alarm has been triggered. The remote will start to beep and
the siren icon will come on solid at the same time as the icon for the violated zone. The
remote will stop beeping after one minute. Both icons will continue to flash until the
system is disarmed.
TRUNK ICON
This icon will be displayed on the LCD screen when the trunk release output is
activated by the remote transmitter. This icon will be displayed on the screen until the
system is armed or if the status button is pressed
BATTERY ICON
This icon is always present when the LCD screen. This icon will indicate the current
battery level for the remote transmitter. The black area of the icon will disappear as the
battery level decreases.
RUN TIMER
This icon activates during remote starting. The bar graph will count down in 2 minute
increments, indicating how much time is left on the remote starter's runtime.
Note: If run time is set to more than 15 minutes graph will remain full time until
remaining runtime is less than 14 minutes.
PROGRAM ICONS
Advertisement
Table of Contents
