Advanced remote starters & vehicle security systems (20 pages)
Summary of Contents for Ultra Start 4500
Page 1
4500 OWNER’S GUIDE Advanced 2-Way Remote Vehicle Starter With Security System AUTOMATIC AND MANUAL TRANSMISSION MODELS WWW.ULTRASTARTERS.COM ATTENTION: THE SYSTEM MUST BE PLACED INTO SERVICE MODE BEFORE ANY UNDER HOOD SERVICING IS DONE TO THE VEHICLE. IT IS THE RESPONSIBILITY OF THE VEHICLE’S OWNER TO INSURE THAT THIS IS DONE.
Owner’s Guide BASIC OPERATIONS Lock Doors And Arm The Alar m 1. Press and release Button #1 on the Remote Transmitter. 2. The park lights will flash and the siren will chirp time. 3. The remote will beep once to confirm. 4.
Owner’s Guide REMOTE STARTER FEATURES Remote Start 1. Press and release Button #3 on the Remote Transmitter. 2. The Park lights will flash and the siren will chirp one time. 3. The remote will beep 3 times and the Key Icon will begin flashing. 4.
Owner’s Guide LCD DISPLAY STATUS ICONS PROGRAM ICONS PROGRAM ICONS STATUS CHECK MODE This feature is used to check the status of the alarm system or the remote starter. 1. To check the status press and release Button #4 on the remote transmitter. 2.
Page 5
Owner’s Guide LCD DISPLAY USER PROGRAM MODE User Program Mode allows the user to program system features from the remote transmitter. The following icons will be displayed on the LCD screen to determine the status of the feature. To Enter User Program Mode 1.
Page 6
Owner’s Guide Transmitter Operation Press once to lock the doors and arm the alarm system. Press 2nd time and hold for Constant Lock Output. Press once to unlock the doors and disarm the alarm system. Press and hold for 3 seconds to activate Panic Mode. Press Once to disable Panic Mode.
Page 7
Owner’s Guide ATTENTION: THE SYSTEM MUST BE PLACED INTO SERVICE MODE BEFORE ANY UNDER HOOD SERVICING IS DONE TO THE VEHICLE. IT IS THE RESPONSIBILITY OF THE VEHICLE’S OWNER TO INSURE THAT THIS IS DONE. THE MANUFACTURER ACCEPTS NO RESPONSIBILITY FOR ACCIDENTAL STARTING WHILE VEHICLE IS BEING SERVICED.
Owner’s Guide Start Fault Indicator If the Key Icon in the remote’s Program Menu is flashing, the remote starter has been disabled. This can be because of various inputs including hood open, brake active, tach lockout or the system is in Service Mode (Valet Mode). When the remote start button is pressed in this mode, the remote will respond by giving 3 beeps and flashing the Key Icon in the Program Window.