Table of Contents
Advertisement
Owner's Guide
2&3
2
3
1
3&4
4
Timer Mode (Selecting Start Interval / Temperature)
1.Press & release button #4, then press and hold button #3 for 5 seconds, the park lights will turn "On".
2. While the parking lights are "on" the start cycle can be selected.
1 hour cycle
or 0C
2 hour cycle or -5C
3 hour cycle or -15C
4 hour cycle
or -25C
3. The system will start vehicle at selected start cycle for a period up to 24 hours.
Quick Timer (Selects Last Programmed Start Inter val/Temperature)
1. Enter Transmitter Program Mode. (Hold Button #4 for 3 seconds)
2. The Telephone Icon will begin to flash on the LCD screen.
3. Press Button #3 and the Telephone Icon will come on solid and the key Icon will begin to flash.
4. Press Button #4 to exit Transmitter Program Mode.
5. The remote starter will now start in the last programmed start interval.
To Disable The Timer Mode:
- Turn the ignition key is turned to the "On" position.
- Enter Transmitter Program Mode and turn the Telephone Icon Off.
- Press Button #3 then press and hold Button #4 for 5 seconds. The park lights will flash twice.
Note: Timer Mode will disable automatically after a 24 hour period.
Diagnostics
PARK LIGHTS
3 Flashes
3 Slow Flashes
4 Flashes
4 Slow Flashes
5 Flashes
6 Flashes
7 Flashes
8 Flashes
Transmitter Operation
Press once to lock the doors and arm the alarm system.
1
Press 2nd time and hold for Constant Lock Output.
Press once to unlock the doors and disarm the alarm system.
Press and hold for 3 seconds to activate Panic Mode.
Press Once to disable Panic Mode.
2
Press and hold for the Trunk Release / Aux Output.
3
Press Once for Start - (2 Times if programmed for Safety Start Mode)
Press and hold for 3 seconds while running to turn off the remote starter.
While running with the key, press the button to activate Idle Mode.
4
Hold for 3 seconds to enter User Programmable Mode.
Press and release button #4 then press and hold button #3 for three seconds to activate the
Timer Mode
Press both buttons for 3 seconds to activate Car Finder Mode.
Press and hold both Buttons to activate the optional 5th Channel output. (Programmable)
Press and hold both Buttons to activate the optional 4th channel output.
Press button #1
Press button #2 2 Park light flashes
Press button #3
Press button #4
STATUS LED
Series of 3 Flashes
No Flashes
No Flashes
Series of 4 Flashes
Series of 5 Flashes
Series of 6 Flashes
Series of 7 Flashes
Series of 8 Flashes
1 Park light flash
3 Park light flashes
4 Park light flashes
DIAGNOSTIC CODE
Door Opened "M" Models
Attempted Start In Service Mode
Hood Or Brake Active Before Start
Not in Reservation Mode "M" units
Hood Pin Grounded While Running
Brake Pedal Shutdown
Tach Lock-Out
3 Start Attempts with no start
Advertisement
Table of Contents
