Manually Programming Talk Group Ids - Radio Shack 20-162 User Manual

5. If you want to unlock all lockouts at the same
time, select Unlock All after Step 2.

Manually Programming Talk Group IDs

1. Press ENT/PGM then TRUNK/MODE to enter
the ID Programming Mode.
2. Press FUNC +
bank.
3. Repeatedly press FUNC + TRUNK/MODE to
select MOT Mode, EDCS Mode, or LT Mode.
4. Repeatedly press TRUNK to select the ID List.
5. Press or
the list.
6. Enter the talk group ID and press ENT/PGM
Use the decimal point for a hyphen if needed.
7. To create an optional ID tag, press PSE/TEXT,
enter the desired text for the ID, and press
ENT/PGM (see "Appendix A: Inputting Text" on
p. 79).
8. To store and program the next ID memory
in sequence, press
Step 6.
Notes:
If you made a mistake in Step 6, "Invalid ID"
•
appears and the scanner beeps.
• You can enter either AFS or a decimal code
for ED (EDACS) IDs. When you press FUNC
then 2 at Step 6, the decimal format appears
for about 2 seconds. Now you can enter the
ID code with a decimal format.
• If you entered an ID code that is already
stored in another ID channel, "Duplicate ID, ID
Memory: X-X appears." Press ENT/PGM to store
the ID code, press CL to cancel.
Trunk Scanning
or to select the desired
to select the ID location within
or and repeat from
53