Radio Shack 20-162 User Manual page 26

Searching
Note: You cannot skip frequencies during
weather scan.
To skip a frequency, press L/O when the scanner
stops on the frequency during a search. The
scanner stores the skipped frequency in memory
and automatically resumes the search.
To clear a single frequency from skip memory:
1. Press PSE to stop the search.
2. Press
3. Press L/O. L/O disappears.
Or
1. In Search or Search Pause Mode, Press FUNC
+ L/O to open the Frequency Lockout menu.
2. Select Review Lockouts and press ENT/PGM.
3. Select the desired frequency and press
ENT/PGM. "Unlock?" appears.
4. Select Yes and press ENT/PGM to clear the
frequency from skip memory.
To clear all the skipped frequencies at once:
1. Press PSE to stop the search.
2. Hold down L/O until the scanner beeps twice.
Or
1. In Search or Search Pause Mode, Press FUNC
+ L/O to open the Frequency Lockout menu.
2. Select Unlock All and press ENT/PGM.
3. Select Yes and press ENT/PGM to clear all
frequencies from skip memory.
Notes:
• If you selected all frequencies to be skipped
within the search range, the scanner beeps
3 times and does not search. "All range Locked
out!" appears.
to select the frequency. L/O appears.
or
26