Setting Control Channel Only Mode - Radio Shack 20-162 User Manual

Trunk Scanning
4. Select the block and press ENT/PGM.
5. Select the size code supplied with the Type I
system information and press ENT/PGM.
6. Repeat steps 4 and 5 for each block.
7. Make sure each entry is correct.
Notes:
• The default setting of the bank is Motorola Type II.
• However, if you set Type I and you want to
return to Type II, enter 15 at Step 5.
• If you cannot find your fleet map information,
try the preset fleet maps (See "Appendix B: Fleet
Maps" on p. 80 for a description of the preset
fleet map).

Setting Control Channel Only Mode

When this function is activated, trunking is
performed using Control Channel data only.
Voice channel frequencies do not have to be
programmed into memory. This feature only
applies to Motorola 800 MHz, 800 MHz Custom,
900 MHz, VHF, UHF systems.
To turn this function on or off:
1. Press FUNC + MAN/MENU to open Menu Mode.
2. Select Trunk Option, then press ENT/PGM. Press
or
3. Select MOT, then press ENT/PGM.
4. Select Set C-Ch Only, and press ENT/PGM.
5. Select On or Off and press ENT/PGM.
to select a bank, then press ENT.
64