Technical Specifications - HP 1410-8G Specification

QuickSpecs

Technical Specifications

HP 1410-8G Switch (J9559A)
I/O ports and slots
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Immunity
8 RJ-45 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or
full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T)
Supports a maximum of 8 autosensing 10/100/1000 ports
Dimensions
Weight
4 Kb EEPROM capacity; packet buffer size: 192 KB
Wall, desktop, and under-table mounting
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Notes
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN
DA - 13674 North America — Version 12 — December 16, 2013
6.14(w) x 3.8(d) x 0.96(h) in (15.6 x 9.65 x 2.45 cm)
0.74 lb (0.34 kg)
< 3.6 µs (LIFO 64-byte packets)
< 1.2 µs (LIFO 64-byte packets)
11.9 Mpps (64-byte packets)
16 Gbps
4096 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 0 dB No fan
50/60 Hz
41 BTU/hr (43.26 kJ/hr)
100 - 240 VAC
1.0 A
12 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
The exact input voltage and frequency rating are determined by the specific
power adaptor part number ordered. Please select the correct power adaptor
country option.
EN 55022 CISPR 22
EN 55024, CISPR 24
HP 1410 Switch series
Page 6