Bottom View - Huffy 211657B Owner's Manual

IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
1.
Remove all parts from packing material and separate tanks from the shipping position.
Carefully, position front tank (1) upside down. Secure wheel (2) into place from bottom side (illust. A)
2.
making sure the wheel bracket (5) seeds into base as in illust. B. Repeat procedure for opposite wheel. Finger tighten,
then upright assembly.
A
1
SIDE VIEW
5
6
3.
Correctly identify each pole section
and mark tape as shown.
8
5" (13 cm)
4.
IMPORTANT!
pole top (7) and middle
section (8) together as
shown until they no longer
move toward taped
reference mark. Upright
assembly.
NOTE: Pole sections
should have a 3-3/4"
(9.5 cm) minimum
overlap.
2
4

BOTTOM VIEW

MIDDLE
Bounce
B
5
3
6
BOTTOM VIEW
TOP
5" (13 cm)
5.
IMPORTANT!
8
top (7) and bottom pole (9)
sections MUST ALIGN to
correctly position elevator
system toward playing
surface. Add bottom pole
section (9) to assembly as
shown and bounce until
completely tight.
NOTE: Pole sections
should have a 3-3/4"
7
(9.5 cm) minimum
overlap.
Wood Scrap
3
7
BOTTOM
35-1/2"
(90.2 cm)
Holes in
04/03
3
4
9
LARGE
HOLE
7
8
9
LARGE
HOLE
P/N 211657B