Table of Contents
Advertisement
the phone cannot be used until a password is
entered to unlock it.
NOtE: The default password is 1234. See the section "Change
Password" in this chapter for information on setting your own
password.
Auto Keypad Lock
The Settings >Security Setup > Auto Keypad
Lock option locks the keypad after a specified
period of time.
For information on unlocking the keypad, see
"Unlocking the Keypad and Slide" on page 8.
Slide Keypad Lock
The Settings >Security Setup > Slide
Keypad Lock option locks the slide to prevent
unintentional usage.
The Slide Keypad Lock option can be set to On
or Off.
Fixed Dial
This function limits dialing to the numbers that
you specify. Fixed dialing is a service offered by
some service providers.
The Fixed Dial option can be set to On or Off
and a fixed dial list can be defined.
NOTE: This option requires a password, known as PIN2.
Consult your service provider if you do not know the password.
Barred Dial
This function enables you to block dialing of
certain numbers. Barred dialing is a service
offered by some service providers.
To enable the option, highlight the Barred Dial
option from the Security Setup menu and press
the left soft key
to toggle the option to On
or Off.
NOtE: This option requires a password. Consult your service
provider if you do not know your password. Not all service
providers support this function.
Change Password
Go to Settings > Security Setup> Change
Password to change passwords for SIM card
PINs or for the phone.
To change a password:
1. Highlight the Change Password option
and press OK.
2. Select the password you want to change:
PIN, PIN2, or Phone Lock Code.
3. You are prompted to enter the old
password, then enter the new password.
NOTE: The default phonelock password is 1234. Consult your
service provider if you have forgotten a PIN password or need
further assistance with PIN passwords.
Restore Factory Settings
Go to Setting > Restore Factory Settings to
restore all settings to factory default, just as
they were when you purchased the phone.
To restore factory default settings:
Highlight the Restore Factory Settings option
from the Settings menu and press the enter key.
All factory default settings are then restored.
NOtE: This option requires a password. Use the default
password, 1234, to access this setting.
39
Advertisement
Table of Contents
