Restore Factory Settings - Asus Castor User Manual

1.8" 176x220 display
Table of Contents

Advertisement

To set the auto keypad lock:
1.
Highlight the Auto Keypad Lock option, then
press the Enter key.
2.
Select to lock the keypad after 5 seconds, 30
seconds, 1 minute, or 5 minutes of inactivity.
Select None to disable the function.
For information on unlocking the keypad, see
the section "Unlocking the Keypad" in the
Getting Started chapter of this manual.
Fixed Dial
The Settings >Security Setup > Fixed Dial func-
tion limits dialing to the numbers that you specify.
Fixed dialing is a service offered by some service
providers.
The Fixed Dial option can be set to On or Off
and a fixed dial list can be defined.
Note:
This option requires a password, known as
PIN2. Consult your service provider if you don't
know the password.
Barred Dial
The Settings >Security Setup > Barred Dial
option enables you to block dialing of certain num-
bers. Barred dialing is a service offered by some
service providers.
To enable the option, highlight the Barred Dial
option from the Security Setup menu and press the
enter key to toggle the option to On or Off. NOTE:
42
This option requires a password. Consult your ser-
vice provider if you don't know your password.
This function may not be supported by all service
providers.
Change Password
Use the Settings >Security Setup > Change
Password option to change passwords for SIM
card PINs or for the phone.
To change a password:
1.
Highlight the Change Password option and
press the Enter key
2.
Select the password you wish to change:
PIN, PIN2, or Phonelock.
3.
You are prompted to enter the old password,
then enter the new password.
Note:
The default phonelock password is 1234.
Consult your service provider if you have forgotten
a PIN password or need further assistance with
PIN passwords.

Restore Factory Settings

The Restore Factory Settings option restores all
settings to factory default, just as they were when
you purchased the phone.
To restore factory default settings, Select Settings
> Restore Factory Settings and press the Enter
key. All factory default settings are then restored.

Advertisement

Table of Contents
loading

Table of Contents