Table of Contents
Advertisement
Making a call
To place a call:
1. Enter the number you want to dial using
the keypad. If you make a mistake, select
Clear to delete at any time. The right soft
key
the lower right screen; select this key to
clear a number.
2. To cancel the call and return to standby
mode, press the Power/end
3. Press the Call
call after you finish dialing the number.
4. Press the Power/end
disconnect the call.
Making international calls
To make an international call:
1. Enter "+" by holding down the
2. Enter the international access code for
the country you want to dial, followed by
the area code and the telephone number.
Answering a call
When you receive a call, the phone alerts
you by sounding the ring tone and vibration
according to the specified ring tone and
vibration settings. To answer the call, do the
16
is just under the word Clear on
key to connect the
key to
Calls
following:
1. Press the Call
call.
2. Press the Power/end
call and disconnect.
You may also select Option > Answer to
answer the call.
Rejecting an incoming call
key.
To reject an incoming call, press the Power/end
key; or, press the right soft key
the Reject option. Depending on your service
provider, the caller may be transferred to your
voice mail or you may hear a busy signal.
Diverting a call
To divert an incoming call to another number:
key.
1. When you receive the call, press Option
and then select the Deflect item.
2. Use the keypad to enter the phone
number to which you want to divert, or
select Search using the left soft key
then browse through the phone book to
select a number.
3. Press OK when done.
key to answer the
key to end the
to select
Advertisement
Table of Contents
