Caller Groups - Asus J208 User Manual

Select From Phone to delete all contacts
stored in the phone.
NOtE: When you attempt to delete all the contacts from the
SIM or phone, you are asked for a password. The default
password is 1234. See the "Security Setup" section in chapter 6
for more information on passwords.

Caller Groups

You can separate contacts into groups to
identify them. There are five caller groups:
Friends, Family, VIP, Business, and Others.
You can change the name of any caller group.
You can add contacts from your phonebook to
a caller group and you can define ringtones,
pictures, etc.
To change the name of a caller group:
1. From the main menu, select Phone
Book > Caller Group.
2. Use the joystick to highlight a caller
group, then press the enter key.
3. Press the enter key to select the current
group name at the top of the list.
4. Select Edit using the left soft key
enter a new name through the keypad
5. Use the right soft key
characters.
6. Press the left soft key
Option > Done when the new name
is complete. Press it a second time to
confirm. You can also change the input
method here.
22
To assign an incoming ring tone:
To change the incoming picture:
NOtE:The picture you select must be smaller than 20 K in
size. You can read more about storing images in your camera
memory in the Camera section in Chapter 7.
to
To add or delete members in a caller group:
to clear
to select
1. Follow steps 1 and 2 of the previous
procedure.
2. Scroll down to Incoming Ringtone
(second in the list), then use the left/right
joystick to choose from the available
options.
Each tone is played as it is displayed.
The chosen ringtone will sound when
someone from the current caller group
calls the phone.
1. Select the caller group to modify as
described in the previous procedure.
2. Use the joystick to select the Incoming
Picture option (third in the list).
3. This option determines which picture
is displayed when someone from the
chosen caller group calls.
1. Select the caller group to modify as
described in the previous procedure.
2. Use the joystick to select the Member
List option (last in the list).
3. Press Enter key to display the member
list.
4. Use the joystick to highlight a member of
the list to modify.