Code And Learn Setting Key - Sunwave Tech. SRC-3000 User Manual

Touch screen

Table of Contents

SRC-3000 User's Manual

Code and Learn Setting Key

Press

confirmation screen. Then press the four numerical keys in

any sequence to enter the selection screen. Press

to scroll through the following options.

•

Code: Use this option to automatically configure all

keys on the SRC-3000 for use with a specific

manufacturer's model number. This option is the

fastest way to program the SRC-3000 but requires that

your device be located in the Pre-programmed Code

List that was bundled with the SRC-3000. Refer to the

supplied code list. Some newer or less-common

devices may not be pre-programmed and their codes

must be learned using the Learning Function by the

SRC-3000.

•

Learn: Use this option to directly learn the infrared

signals from another remote control. This option is

perfect for newer or less common devices, or if a

certain key does not perform the desired function

after using the CODE option. However, if you come

across the problem that the SRC-3000 cannot learn

your device codes, refer to "Troubleshooting" on page

36 or contact the dealer.

(Code setup key) for three seconds to enter the

and

Table of Contents

Show Quick Links

Table of Contents