Load The Codes For The Newly-Added Device; Pre-Code - Sunwave Tech. SRC-7000 User Manual

Touch screen smart remote control

Hide thumbs Also See for SRC-7000:

Table of Contents

Chapter 3 How to Set Up Your SRC-7000

Please decide the "Device Category" for your device by pressing

the

next step.

Finally, please decide how you will load the IR remote codes for

the device. There are three choices for you: "Pre-code",

"Learning" and "Done". For more detail please refer to the

following sections to get further understanding.

3.1.2 Load the Codes for the Newly-added Device

When adding a new device, you will be asked if you will load the

codes for your device. There are two ways to load IR remote codes

for your newly-added device: "

Please choose one of these two ways to load the codes. If you

don't want to load any codes for the device, just select "Done" to

finish the setting process.

A. Pre-code

SRC-7000 is equipped with a huge pre-programmed code

database. With this function you are able to load the remote codes

for your device easily. It also enables you to control the device even

if you lose your original remote.

When you have successfully added a new device, and want to use

the "Pre-code" to load the codes, please choose this item.

buttons. Press the

to confirm and enter

Pre-code" & "

Learning".

Table of Contents