Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Mini 4 Bar 2.0 User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Configuration
(DMX)

Starting Address

Mini 4 Bar™ 2.0 User Manual (Rev. 03)
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the buttons location on the
control panel.
Button
Press to find an operation mode or to back out of the current menu
<MENU>
option
<DOWN> Press to scroll down the list of options or to find a higher value
<UP> Press to scroll up the list of options or to find a lower value
Mode Programming Steps
DMX Mode 512
Sound Active SND
Automatic AUTO
Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The Mini 4 Bar™ 2.0 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer section in
the Technical Information chapter.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Function
Description
Puts the fixture in DMX operating mode
A 1~d512
and selects the DMX starting address
Triggers the sound active program to the
-
music, using the internal microphone
Selects one of the built in programs
S 1~100
Adjusts the speed of the automatic
program
Page 9 of 18