Operating Instructions; Operation; Standalone Mode (Sound-Active, Auto Mode); Dmx Mode - Chauvet Kinta X User Manual

5. O
PERATING

Operation

Standalone Mode (Sound-Active, Auto Mode):

This mode allows a single unit to run to the beat of the music.
1) Set dipswitches position to Sound Active or Auto Mode.
Mode
Sound Active
2) The product will react to the low frequencies of music via the internal microphone in Sound
Active mode
3) Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the
knob clockwise increases the sensitivity.

DMX Mode

This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, download the DMX Primer from www.chauvetlighting.com.
1) Set dipswitches position to DMX mode.
Mode
DMX
2) Use dipswitches 1-9 to set the DMX address.
DMX Channel Values
C
HANNEL
1
2
-Note: Channel 1 will override the motor control channel (channel 2)
Kinta™ X User Manual
I
NSTRUCTIONS
Dipswitches
1-10= Off
Dipswitches
10= On
V F
ALUE UNCTION
Control/Operating Mode
000  014
No function
015  100
LEDs on
101  255
Auto
Motor Rotation
001  085
Counter-clockwise motor rotation (Slow ~ Fast)
086  170
Clockwise motor rotation (Slow ~ Fast)
171  255
Motor rotation right-to-left-to-right (Slow ~ Fast)
8 Rev. 4