Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
SlimPAR™ 64 RGBA User Manual (Rev. 1)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The SlimPAR™ 64 RGBA may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
•
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
•
When power linking multiple products, consider the length of the power linking cable
and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•
The double-bracketed yoke also serves as a floor supports or allow for surface
mounting. When mounting the product on the floor, make sure that the product and
cables are away from people and vehicles.
Safety cable
Overhead Mounting
Mounting bracket
adjustment knob
Technical
Specifications).
Clamp
Floor Mounting
Page 9 of 15
Advertisement
Table of Contents
