Changing The Tv Settings; Using The Channel Menu - Hisense HL106V68PZ User Manual

Changing the TV Settings

Using the Channel Menu

Channel
Auto Install
Manual Install
Fine Tune
Program Edit
: Move OK/ : Enter
■ Auto Install
-In both the Analog and Digital signal source.
This is the easiest and most effective way to install all channels available in your area automatically.
● Press [▲/▼] to select Auto Install.
● Press [►/OK] to start an automatic search, and this will memorize all the available channels.
Auto Install will take a few minutes; please wait until it has finished.
■ Manual Install
-In Analog signal source
Manual Install is only needed when analogue channels are not found under an automatic tune.
● Press [▲/▼] to select Manual Install menu, then press ►/OK] to enter Manual Install menu.
● Press the [▲/▼] button to select Channel No., and use [◄/ ►] to set the Manual Install initial Channel No..
● Press the [▲/▼] button to select Channel No., use the [◄/ ►] button to set the Manual Install initial Channel
No./Direction, then press [OK] to install channels from the initial channel No. along this initial direction.
● If you would like to edit your installed Analog channel name, press [▲/▼] to select Channel Name, then select a
number (0_9) or press repeatedly to select a letter.
e.g.
1 (A, B, C)
2 (D, E, F)
Pressing '1' 3 times will display the letter C. Press [►] to move to the next letter space and repeat until the desired
channel name is displayed.
● Press [▲/▼] to select Save and press [OK] button to confirm. Press [EXIT] to exit all menus.
● Press [MENU] to open the main menu.
● Press [▲/▼] to select Channel, then press [ ►/OK] to
● Press [▲/▼] to select an option.
● Press [►/OK] to enter the submenu.
● Press [MENU] to return the up menu.
● Press [EXIT] to exit.
EXIT/MENU: Exit
18
enter the Channel menu.