Using The Lock Menu - Hisense HL106V68PZ User Manual

Changing the TV Settings

Using the Lock Menu

Lock Settings
Parental Guidance
Hotel Lock
Child Lock
Change Password
:Move OK/ : Enter
■ Parental Guidance - in Digital TV source
Select rating Lock by pressing the [P+] up to your desired rating block. Or select 'Block All' by selecting and
pressing 'OK' To select rating blocks scroll up to G by pressing [p+] then press [P-] to de-select in descending
order.
If you enable Parental Guidance, password protection is activated, most OSD functions and some programs are
locked, and require inputting of a password.
Note: Those channels broadcast without rating information will not be locked.
Parental Guidance is a good tool to protect your children from watching unsuitable programs.
■ Hotel Lock - An option to secure major settings in place.(Used for commercial purpose only)
If the Hotel Lock is "On", some options can be changed, and others are password protected. Most OSD
functions are locked except inputting a password.
1. Min Volume and Max control : You can set their volume from 1 to 100.
2. Panel Button Lock: Locks the TV panel buttons except [POWER] button.
3. Submenu Lock: Locks OSD operation except Picture and Lock Settings.
4. Input selection : Input selection (Analog TV, Digital TV, PC...)which are set "On" can be used in Source OSD,
Input selection (Analog TV, Digital TV, PC...)which are set "Off" cannot be selected on the Source OSD.
5. Initial Setting: If the Initial program is set to "Last", and the Basic Setting set to "On",when switching the TV on
it will revert back to the last viewed source including the channel station last viewed, the picture mode and the
sound mode will be set to Standard mode, the volume value will be set at 30%.
■ Child Lock - If Child Lock is set to "on" , most of the remote and the panel buttons are locked except
[PowerStandby], [VOL▲], [VOL▼] and the [MENU] buttons on the right side of the front panel and
[PowerStandby], [VOL+] , [VOL-] , [OK] , [MENU] and [NUMBER] buttons on the remote control. Press [MENU] to
display the main menu, only Lock Settings can be selected and adjusted by entering your password, the
[NUMBER] buttons are used for entering a password.
NOTE: The factory initial password is "1111".
■ Change Password - Setting your password:
1. Input your password"____"(The factory initial password is "1111").
2. Repeat input your password "****" to confirm.
3. Select "Save" option and press [OK] button to confirm.
● Press [MENU] to open the main menu.
● Press [▲/▼] to select Lock , then press [ ►/OK] to enter
● Press [▲/▼] to select an option.
Block None
● Press [◄/ ►] to adjust the option or press [ ►/OK] to enter
Off
Off
● Press [MENU] to return the up menu.
● Press [EXIT] to exit.
MENU/EXIT: Exit
the Lock menu.
the submenu.
23