Changing the TV Settings
Using the Channel Menu
Auto Install
DTV Manual Install
ATV Manual Install
Program Edit
■ Auto Install
This is the easiest and most effective way to install all channels available in your area automatically.
-In both the Analog and Digital signal source
● Press [▲/▼] to select Auto Installing.
● Press [OK] start an automatic search, and this will memorize all the available channels.
Auto Tuning will take a few minutes; please wait until it has finished.
■ DTV Manual Install
-in Digital signal source
Digital channel numbers are different to the existing analog channel numbers; please contact the broadcaster in
your state for the correct number.
● Press [▲/▼] to select the DTV Manual Tuning, then press [OK] to enter DTV Manual Tuning menu
● Press [◄/►] to select a channel then press [OK] to search.
■ ATV Manual Install
-In Analog signal source
Manual Install is only needed when analogue channels are not found under an automatic tune.
● Press [▲/▼] to select ATV Manual Tuning, then press [OK] to enter ATV Manual Tuning menu.
● Press [◄/►] to select a channel.
● Press [▲/▼] to select Search then press [◄/►] to begin tuning.
● Press the red button to save the channel.
NOTE: System setting for Australia is BG.
● Press [Menu] to open the main menu.
● Press [▲/▼] to select Channel, then press [►/OK] to
enter the Channel menu.
● Press [▲/▼] to select an option.
● Press [►/OK] to enter the submenu.
● Press [Menu] to return the up menu.
● Press [Exit] to exit
19